In a drift application when high steering angles are required, the steering link and knuckle position can align, making steering very difficult. This is known as steering bind or overcentering and the best solution is to move forward the inboard mount on the steering rack. This can be achieved with offset rack spacers, however, by creating this offset, a bending moment is applied to the steering rack. This over time leads to the deterioration of the rack seals, or even the bending of the rack. So, for a dedicated drift car, the best solution to steering bind is to do away with the offset rack spacers and relocate the entire rack forward.
Because of the shape of the OEM subframe, in order to relocate the rack, the OEM subframe must be cut apart and new mounts welded in along with bracing to strengthen the cut away sections.
Our kit moves the rack forward 30mm and contains a detailed install guide along with cutting templates to make the install process as smooth as possible.
This rack relocation has been designed from a 3D scan to ensure an accurate match and fitment.
NOTE: Will not fit new Gen GR86 & BRZ 2021+ Models
FAQs
How far does this kit move the steering rack forward?
30mm
I have the rack relocation kit, do I need rack spacers also?
No, our inner tie rod ends already have 5mm of travel inbuilt into them.
VEHICLE COMPATIBILITY
Subaru
BRZ ZC6
Toyota
GT86 ZN6
Unfortunately there are no reviews yet. Be the first who rates this product.
