If you're running R32 GTR calipers on your R32 GTR then have a think about upgrading your rotors from 296mm to a whopping 324mm's. With these brackets installed 324mm R33 GTR rotors are a direct fit and will significantly increase the surface area of your rotor and help to avoid brake fade whilst also filling your rims and guaranteeing more interest from the opposite kind.
- Aluminium 6061-T6 construction with grade 10.9 fittings
Vehicle Compatibility:
- Nissan R32 GTR
NOTE: 17" rims or larger required to fit 324mm rotors (rotors are NOT included)
NOTE #2: the standard pads do have some pad overhang due to the increase in the radius of the rotor which isn't a big issue but if you're getting new pads at the same time, get Landcruiser 1199 pads as they fit better
FAQ'S
Will this fit my car?
We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.
If you are running R32 GTR calipers then this is a straight fit.
Do you make these to suit other cars?
We only sell the parts listed on our website. If it's not listed on our website, then we don't sell it. Sorry.
What's the advantage of using the HFM caliper bracket?
You can easily upgrade your rotors from 296mm to 324mm, which drastically increases the efficiency of the brakes, while also avoiding brake fade.
What modifications are required, is this hard to fit?
Simply just remove and refit, to install the larger rotors you need to trim the dust cover and depending on your calipers, you'll need to shave the bit that hits on the bolts. It is super simple and self-explanatory when seen.
Is there anything else needed for installation?
Yes, you will need the 324mm rotors to suit these brackets
Can I install this myself? If so how long will installation take?
Yes, being a simple rotor and bracket swap, installation should take around 45 minutes. However, being the brake system we recommend only a trained professional to install this product
Why do you recommend to use DB1346 brake pads?
The DB1346 corresponds to a Bendix brake pad, you can purchase any brake pad you like that is the equivalent to this part number. The reason we recommend using that part number is that the pad material sits lower in the caliper as opposed to the genuine Skyline brake pad allowing you to get more brake pad coverage across the rotor surface.
What will happen if I use standard brake pads?
Although you can use your standard brake pads, you will have a 2mm pad overhang. Using DB1346 or equivalent will reduce the overhang.
Leider sind noch keine Bewertungen vorhanden. Seien Sie der Erste, der das Produkt bewertet.
