Das Kit umdas ABS System stillzulegen
GKTECH STAINLESS STEEL BRAIDED TEFLON LINED ABS DELETE KIT RHD
The GKTECH ABS Delete line kits are assembled by us in-house in Australia using quality UK made fittings and braided stainless steel, teflon lined lines.
We developed these kits after the frustration in trying to remove the ABS on our own cars. The normal route is to find a car without ABS and swap the master cylinder and all lines in the engine bay however these days it's pretty hard as most R33 and R34 Skylines and S14 and S15 200sx's came standard with ABS. Our kit is super easy to install, simply remove the standard lines and plug them in. Total install time should be around 30 minutes.
The lines are assembled by us in-house in Australia using quality UK made stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection, which comply with all ADR, DOT and TUV specifications. - Direct replacement of the standard hard lines - Cleans up the look of the engine bay - For race cars only however no permanent modifications are required.
Vehicle Compatibility:
- Nissan 180sx
- Nissan S13 Silvia
- Nissan S14 200SX
- Nissan S15 200SX
- Nissan Skyline R32 GTS-T
- Nissan Skyline R32 GTR
- Nissan Skyline R32 GTS-4
- Nissan Skyline R33 GTS-T
- Nissan Skyline R33 GTR
- Nissan Skyline R34 GTT
- Nissan Skyline R34 GTR
- Nissan C33
- Nissan C34
- Nissan C35
- Nissan A31 Cefiro
NOTE: T-piece fitting will differ from photos shown here, the photo here is of our original prototype
NOTE#2: For RHD Vehicles only, please see out other listing for LHD Vehicles.
FAQ'S
Will this fit my car?
We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.
Do you make these to suit other cars?
We only sell the parts listed on our website. If it's not listed on our website, then we don't sell it. Sorry.
We do make a LHD and a RHD specific version for the ABS delete kit, which you will need to select before purchasing.
What's the advantage of using the GKTech ABS delete kit?
OEM non-ABS hardware is becoming harder to find. This kit allows you to neatly delete the ABS while also using our UK made stainless steel fittings, Teflon inner tube and PVC outer ADR/DOT and TUV spec. braided brake lines. You can also mount the lines to suit your application.
What modifications are required, are these hard to fit?
No modifications are required, simply just remove and refit.
Is there anything else needed for installation?
You will need to re-bleed your brakes, so you will need tools and brake fluid, in terms of the kit, it will arrive as shown in the product photo.
Can I install this myself? If so how long will installation take?
Yes, the kit is easy to install and should take around 30 minutes. Simply remove your old lines, remove your ABS module, then put these lines in their place. You can run the lines along the K-Frame or the firewall. Then tighten the lines referencing the OEM torque specs. You will then need to top up the brake fluid and bleed the brake system. However, being the brake system we recommend only a trained professional to install this product.
Are there any negatives to removing the ABS lines/module?
Removing ABS for a track driven car is a must and is strongly suggested. ABS modules are known to kick in under hard braking or in the wet unexpectedly.
Will my ABS light show an error?
Yep, it sure will. Simply remove the bulb from the dash cluster and you'll be none the wiser, problem solved.
Is it illegal to remove the ABS module on a street driven car?
We're not 100% sure but as with most mods, it probably is. If it is illegal then we suggest for race track use only and ABS is use full for everyday driving scenarios.
